Top 10 Best Thermal Tape For Gpu In 2022 [User Ratings]

NoProductScoreAction
1Thermal Adhesive Tape, 25m x 10mm x 0.20mm Double Side Thermal Tapes Cooling Heatsink Pad Apply to LED9.8Buy from Amazon
2A ADWITS [ 6-Pack ] Thermal Conductive Silicone Pads9.8Buy from Amazon
3Easycargo 10pcs 20mm Heatsink Kit 20x20x10mm + 3M 8810 Thermal Conductive Adhesive Tape9.8Buy from Amazon
4Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + Thermal Conductive Adhesive Tape9.4Buy from Amazon
5AVNTKER Double Sided Thermal Tape 2 inch/50mmx25m Super Strong Sticky Heatsink Cooling Pad Radiator Thermal Adhesive Tape for CPU9.2Buy from Amazon
6HPFIX Thermal Adhesive Tape 10mm by 25M9Buy from Amazon
7SIXQJZML 30Pcs 20x20x1mm Soft Silicone Thermal Conductive Pads Heatsink IC Chipset Northbridge for CPU GPU Heatsink9Buy from Amazon
8Awxlumv 10 pcs Small Heat Sinks 9 x 9 x 5 mm Aluminum Heatsink with Thermal Conductive Double Sided Tape for Cooling GPU IC Chips VRAM VGA RAM8.8Buy from Amazon
9Thermal Adhesive Tape, Double Side Thermal Conductive Tape for Heatsink8.4Buy from Amazon
10Smalloo 0.8"×80ft in Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks8.4Buy from Amazon
Disclaimer: As An Amazon Associate "G Times Magazine" Earn From Qualifying Purchases.

Table Of Content:

1. Thermal Adhesive Tape

  • Thermal Adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • EFFICIENT THERMAL CONDUCTIVITY – The Thermal Pad based on silicone & a special filler outperforms generic and performance pads by far.
  • Thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
  • Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.

2. A ADWITS [ 6-Pack ] Thermal Conductive Silicone Pads

  • Excellent thermal conductivity: Made of thermal silica gel with heat conductivity of 6.0 W/Mk
  • Great safety and stability: electrical insulation, in -40 ℃ – 200 ℃ will not melt.
  • Fits for Control board, motor, electronics, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC SMD DIP and any cooling modules.
  • Packed with 6 thermal pads, three sizes, each with 2 pieces: 20x67x0.5mm, 20x67x1.0mm, 20x67x1.5mm
  • Easy to install, you can select most suitable thickness and cut the required sizes.

3. Easycargo 10pcs 20mm Heatsink Kit 20x20x10mm + 3M 8810 Thermal Conductive Adhesive Tape

  • Includes 10 pcs black anodized aluminum heatsink
  • Pre-applied thermal conductive adhesive tape backing
  • Can be applied for passive cooling of LED, FPV transmitter, Vram, RAM, IC Chips, etc.
  • Dimension: 0.79 x 0.79 x 0.39 inch / 20 x 20 x 10mm (L*W*H)
  • Weight: 0.25 oz / 7 gr per pc

4. Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + Thermal Conductive Adhesive Tape

  • Universal Heatsink Assortment Box,124pcs Multicolor in 9 different size
  • Variety Aluminum and Copper heat sinks with 3M 8810 Pre-applied Thermal Conductive Adhesive Tape for cooling raspberry pi 4, VRM VRAM RAM CPU GPU MOSFET Small IC Chips PC Components Laptop M2 M.
  • Includes: 8pcs black anodized aluminum heatsink: 0.
  • Includes: 16pcs black anodized aluminum heatsink: 0.
  • Includes: 20pcs black anodized aluminum small heatsink: 0.

5. AVNTKER Double Sided Thermal Tape 2 inch/50mmx25m Super Strong Sticky Heatsink Cooling Pad Radiator Thermal Adhesive Tape for CPU

  • Material: Double sided thermal tape is made of a mixture of acrylic polymer, thermal conductive ceramic powder and silicone adhesive, full roll size 25mx50mmx0.
  • Excellent Performance: Thermally conductive sticky tape has super stickiness and can firmly fix the heatsinks to the heating element, effectively improving the heat transfer between electronic components.
  • High Durability: Thermal duct tape has extremely stable performance, durable adhesion on both sides, no residual glue, and can work for a minimum of 5 years in high temperature environment of 80-152°C.
  • Security Application: The heat dissipation tape is insulative and non-conductive, which eliminates any risks of causing short circuit, adding more protection to the CPU, GPU, VGA cards, HDD, SSD drive, VRAM, M2 hard disk, Water cooling kit, Laptop, PCB, IGBT, Mos tubes, Diode, Triode, Circuit board, Logic board, Raspberry pi, LED cooler, 5D printer.
  • Widely Applications: Heavy duty two sided stick tape can be used for attach aluminum/copper heat sinks to heating element, fixed the carpet to prevent sliding, pasting poster and photo, mounting road signs & decoration graphics, and woodworking activity such as splicing, machine cutting, cnc woodworking, routing, and anchoring.

6. HPFIX Thermal Adhesive Tape 10mm by 25M

  • HPFIX double adhesive thermal tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
  • Thermally conductive tape has very strong adhesion and has good thermal conductivity.
  • HPFIX thermal tape has thermal conductivity 1.
  • Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
  • Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).

7. SIXQJZML 30Pcs 20x20x1mm Soft Silicone Thermal Conductive Pads Heatsink IC Chipset Northbridge for CPU GPU Heatsink

  • 20x20x1mm Soft Thermal Conductive Pads
  • Material: Conduction Silicone,Color: Blue
  • Thermal Conductivity: 1.2(W/M-K),Tensile Strength: 12Kgf/cm2
  • Breakdown Voltage: 4.5KV,Soft,good malleability,with a little viscosity.
  • Package Includes:30PCS x thermal pad

8. Awxlumv 10 pcs Small Heat Sinks 9 x 9 x 5 mm Aluminum Heatsink with Thermal Conductive Double Sided Tape for Cooling GPU IC Chips VRAM VGA RAM

  • Material: Aluminum; Color: Black
  • With Thermal Conductive Double Sided Tape included
  • Thermal conductivity of thermal tape: 0.8 W / m-k :Long-term temperature resistance: 176 ℉
  • Can be applied for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc
  • Package: Heat sink x 10 pieces

9. Thermal Adhesive Tape

  • GOOD ADHESION – This heatsink tape has strong adhesion which makes cooling random objects so much easier as it combines the heat sinks and electronic devices into it.
  • HiGH THERMAL CONDUCTIVITY—-The thermal tape made of acrylic polymer which filled with heat conductive ceramic powder and silicone adhesive compound and into.
  • WIDELY APPLICATION—-The double side thermal tape featuring electrically insulated , thermally conductivity and strong adhesion is ideal for Heatsink, LED Strips, IGBT, IC Chip, Computer CPU, GPU, Modules, MOS Tube, SSD Drives.
  • MEET ROHS & UL THE ENVIORMENT —-The heatsink tape has high thermal conductivity 1.
  • EASY TO USE—-Stick on surface of any object and tear the blue release paper, which can be tightly and firmly conglutinate on the heat source devices and heat sink to speed the heat dissipation.

10. Smalloo 0.8″×80ft in Double Side Adhesive Thermal Conductive Cooling Tape for Heatsinks

  • 8″×80ft(wideth×length) double side adhesive thermal conductive tape for heatsink, like heatsink for LED, IGBT, IC Chip, Computer CPU, GPU, Modules, Raspberry pi, Electrically Insulated.
  • The thermal conductive cooling tape thermal conductivity: glass fiber thickness 0.
  • The thermal adhesive with the features of high thermal conductivity, insulation, strong stickiness, softness, compression.
  • The thermal adhesive tape is simple and practical , Combined with thermal paste, the effect will be better and very easy to use.
  • Double-sided thermal adhesive tape at low cost solve the problem of heat dissipation, it is great helper to solve heat dissipation for many electronics products.

Leave a Comment